My props do not come up

If there are other studios in the vicinity, you most likely rezzed then too close to each other.  It is recommended that you rez the studio at a distance of at least 10m from any other studios.  You can move it closer after it initializes.

Otherwise, it sounds like your modeling table did not initialize properly.

Solution

You need to connect your modeling table to your studio.  To do this:

1.  Click and hold for at least 5 seconds on the BASE portion of your modeling table.  The modeling table will respond by letting you know it is connected to your studio. (Click Ignore on the menu when it appears.)
2.  Next, click and hold for at least 5 seconds on the blue zero degree rotation button just above your modeling table.  The modeling table buttons will respond by letting you know it is connected to your studio.

If that does not work for some reason, check the modeling table and buttons to see if they have the correct Studio ID.  You can see your Studio ID by clicking your control box and selecting Studio ID.

1. Right click on your modeling table and select EDIT.
2. Look in the description field of the edit window.  The number there should be the same as your Studio ID.
3. Now click on the buttons while in edit mode and look in the description field.  The number there should be the same as your Studio ID.
4. If either number is not your Studio ID, you can edit it yourself by simply overwriting the number that is there with your Studio ID.
5. If you have just rezzed your studio and have not added backgrounds and poses, etc to customize it, it is recommended that you simply delete it and rez a fresh studio.