N30 Foundations Studio Development Mode (Advanced Only)

The new studio can be put into development mode.  To put your studio in Development Mode, you must edit the ++SETTINGS notecard to read developmentmode=on.  Set it to developmentmode=off to turn it back off.  You will need to reset your studio using the menu after making any changes to the notecard to reload your studio skin.

Development mode at this time allows you to:

• Retrieve lighting positions easily for preset lighting configuration positions

Instructions for Lighting Position Configuration Development

1. Move the lights individually where you would like them.
2. Click the Menu button and select “Development”.
3. Then select Light Pos.
4. You will see in chat the current positions of each light.  Use a notecard or Wordpad to copy and paste these settings.  The positions will look like this:

   [0:34]  Right Upper Light: RUlpos=<1.85640, -3.01590, -0.01060>
   [0:40]  Right Upper Light: RUlpos=<1.85640, -3.01590, -0.01060>
   [0:40]  Center Light: CTlpos=<1.39169, -4.04665, 0.68463>
   [0:40]  Left Upper Light: LUlpos=<1.85640, -4.84360, -0.01060>
   [0:40]  Left Lower Light: LLlpos=<1.33360, -5.14840, -1.07620>
   [0:40]  Right Lower Light: RLlpos=<1.33360, -2.77350, -1.07620>
   [0:40]  Rear Center Light: BClpos=<-1.01980, -3.97870, -0.03230>
   [0:40]  Rear Left Light: BLlpos=<0.26180, -5.88380, -0.78570>
   [0:40]  Rear Right Light: BRlpos=<0.26200, -2.08210, -0.78570>

5. Each individual light setting in the +SKIN notecard looks like this:

   //RIGHT UPPER LIGHT
   RUlpos=<1.85640, -3.01595, -0.06281>;<1.85640, -3.47720, -0.06281>;<1.85640, -3.47720, 0.49829>;<1.85640, -2.16791, 0.70136>;<1.85640, -3.06722, 0.49829>

6. The setting titles such as BRlpos are printed for your reference to make it easier to paste each setting with it’s light in the notecard.
7. When you have 5 settings for each light (to do this move each light to the desired position and use the menu to get the position in chat), then put the together as show here using semi colons to separate each setting.  The first setting will be controlled by number 1, the second my number 2 and so on:

   //RIGHT UPPER LIGHT
   RUlpos=<1.85640, -3.01595, -0.06281>;<1.85640, -3.47720, -0.06281>;<1.85640, -3.47720, 0.49829>;<1.85640, -2.16791, 0.70136>;<1.85640, -3.06722, 0.49829>